Tools

The RTP-1 combines two ride-saving tools — the MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool — into one ultra-portable package. The included tool holder securely holds both tools without adding excess weight, and can be mounted or strapped to most bike frames. The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs. The TPT-1 is a handy carry-along tool for repairing small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket. MTB-5 Includes the following: - 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches - T25 Torx-compatible driver - Philips #2 cross tip & flat head screwdrivers - Chain tool (5 to 12 speed compatible)* - Spoke wrenches (equivalent to SW-0 and SW-2) - Presta valve core removal tool - Disc brake rotor truing tool - Disc brake pad spreader *The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets - Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm) - Weight: 6.9 oz. (195 g) - Replaceable chain tool pin (Part #985-1) TPT-1 - Includes 5 vulcanized rubber plugs (refills available - part #2370K) - Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") - Weight: 79 grams (2.8 oz.) with plugs NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid

Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid.

This tool set consists of 4 / 5 / 6Nm TorqSockets that will work with any mini tool containing a 5 mm Allen wrench (or single 5 mm Allen wrench). Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. A carry case neatly stores three preset TorqSockets (4 / 5 / 6Nm) and the 5 most popular tool bits (3 / 4 / 5 mm hex & T20 / T25 Torx). - Added Feature: Rubber Strap, Carry case - Functions: 15 - Allen Bits: 3/4/5 mm - Tool Material: Hardened steel - Torx Bits: T20 / T25 - Torque Value: 4/5/6 Nm - Size: 8.2 x 5.1 x 2.7 cm / 3.2” x 2” x 1.1” - Weight: 130 grams

Tools for working with DT Swiss spokes. - Special for stainless spokes

Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for pulling out the tire. Plus, it's adjustable to fit various tire widths.

Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below

The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!

Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc.) in the TS-2.2, use the TS-2TA Thru Axle Adaptors (sold separately).

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

- Structurally supports rear dropouts for maximum frame protection during travel. - Allows full forward or backward rotation of drivetrain and shifting through full range of gears. - Adjustable design fits 130 and 135 QR dropouts and all 12mm thru axle frames up to 12x157. - Professional grade aluminum and solvent resistant plastic components ready for daily life in the wash bucket or traveling the world. The Travel Keeper is equally at home protecting a frame's rear triangle during travel or providing full chain keeper functionality. Adjustable design fits all rear QR and 12mm thru axle frames and features aluminum construction, shifting across all gears, and heavy-duty solvent resistant plastic pulley.

"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings: • Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose • Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS • Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm • Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire • Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes Also included: • Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing • Guide magnet — routes guide cables through the frame from the outside"

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

Before you find yourself in a bind, it's important to plan on how you'll get out of one. Well, look no further than our SWAT Conceal Carry MTB Tool. It stashes an emergency multi-tool and chain breaker inside the steerer tube of a suspension fork for easy transport and instant access. On the tool, you'll find a wide array of Allen keys and a Torx wrench, so you'll be able to get out of any trail-side jam. - Stores a multi-tool and chain breaker in the steerer tube of most modern suspension forks with alloy steerer tubes. - Quick-action top pivots away to release spring loaded multi-tool. - Features hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes 3, 4, 5, 6, and 8mm Allen keys and a T25 Torx.

- Pedal thread inserts are used to replace damaged threads in cranks

Compact, easy-to-use-and-read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2 – 6 Nm.

Wera compact tool with multi-component Kraftform handle for high working speeds and ergonomic screwdriving. Integrated bit magazine in the handle. Includes ratchet: fine-pitched for small return angle, switchover ring (right, fixed, left), maximum torque of up to 50 Nm; hexagonal blade with 1/4" hexagon socket take-up, stainless sleeve, strong magnet. - Kraftform Kompakt with ratchet function for high working speeds - Kraftform with anti-roll feature, multi-component, integrated magazine - Fine-pitched teeth for small return angle; switchover ring (right, fixed, left) - Maximum torque of up to 50 Newton meters

Securely holds any of Park's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling. - Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches. The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic. Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort. The set includes T7, T10, T15, T20, T25, T30, and T40 sizes all backed by Pedro's lifetime warranty.

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4" bits: - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex - T25 Torx-compatible - #2 Philips cross tip - Bit holder includes empty spaces for 2 extra bits

30 function, pro-quality, precision mini-tool with integrated tubeless tire repair tools. Removable chain tool with built-in master link tool for removing and reinstalling master link type chains stores securely within the Mini PT30 body. Forged alloy body. Perfect for any road or trailside repair. - Functions: 30 - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Weight: 169g / 5.96oz - Size: 7.4 x 4 x 1.9cm / 2.9" x 1.6" x 0.7" - Additional Features: Knife blade & plug insertion tool lock, extendable for leverage, secondary chain link fence, chain pin breaker, and master link storage compartment - Includes neoprene bag Tools: - 2L / 2.5 / 3 / 4 / 5 / 6 / 8mm Allen wrenches - 10mm hex socket - T10 / T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, chain hook, CrMo master link tool (compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains) - #2 Phillips / flat head screwdrivers - Tire reamer, plug insertion tool - Serrated knife/saw, disc spacer

Securely holds the TS-4 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, -4, and -33) - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

Park Tool's TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK. The TS-RK includes the following: • 1 - #211S Main Shaft • 4 - #749-1 Bearing Washer • 2 - #748-1 Needle Bearing • 2 - #209-2 Shaft Adjusting Collar • 1 - #229 Spring • 4 - #232-2 Split Nylon Bushing • 2 - #235-2 Split Nylon Bushing • 1 - #222-SR Right Caliper Spring • 1 - #222-SL Left Caliper Spring • 1 - Set of Installation and Adjustment Instructions

- Special cable cutter for SIS type cables and housings - Neat, clean cut - Features a cable ferrule plier - Superior quality, 1095 carbon steel

The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes.

The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

- A multi-tool that includes a tubeless tire repair kit - 18 individual tools 22.5345mm hexes T25 Torx wrench stainless steel reamer knife plug tool and air stop - Also includes three 5mm thick tire plugs and integrated storage compartment - Vanadium s

Suspension maintenance and tuning require tools designed for a precise fit. The SKT-6 from Park Tools is a shop-quality set of six flat-faced sockets designed for use with common suspension fork fittings. Ideal for use with Park Tool Torque Wrenches, the 3/8-inch drive sockets are forged from tough chrome vanadium steel and chrome plated for lasting durability. - 24, 26, 27, 28, 30, 32mm flat-faced sockets - All sockets are 3/8" drive - Note: 27mm socket is tapered for better access on Suntour suspension forks

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade - Metal construction holds up to frequent use

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless forks. Slide on the guide, clamp it down and the hardened-steel cutting slot ensures a perfect cut every time. You can remove as little as 1mm, too.

Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too.

21-Function Premium Multi-Tool - Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee™. - Hex Wrenches: 2, 2.5, 3, 4, 5, 6, 8mm. - T25 and T30 torx and Flat Blade screwdriver. - 1-13 speed Chain Tool with integrated: 7 & 8mm Flare Box Wrenches, 3.23, 3.30, & 3.45 Spoke Wrenches, Shimano® Crank Cap Tool, and Presta Valve Core Tool. - Micro Levers with integrated Quick Link Storage. - 160 grams. Rx Micro multi-tools deliver the perfect balance of size, weight, and function, ready for trailside repairs and daily adjustments. Designed for performance and durability with 6061 aluminum body, premium CrMo tool steel bits, and an anti-corrosion finish backed by our Rust-Free Guarantee™. Each new Rx Micro model now includes a 2mm hex wrench.

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles. • Includes a set of 2 taps, 9/16" x 20 tpi • Made of high carbon steel, precision ground, and hardened to stay sharp • Fits all conventional tap handles The tap drill size for a 9/16-inch x 20 tpi thread is nominally 33/64-inch.

Lefty Hub Adaptor for The DT Swiss Truing Stand.

Guide tool for starting nipples in deep/aero rims.

Park's Threadless Star Nut Setter makes it quick and easy to install star-fangled nuts used with 1-inch and 1-1/8-inch threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. Plus, the unique design virtually eliminates pinched fingers!

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7-inches (35cm) long and can be used with one hand to hold any 5-speed to 12-speed road or mountain cassette solidly during lock ring removal. Forged steel construction with a spring loaded return and comfortable dual density grips.

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.

This professional-grade set includes five unique cleaning tools purpose-built for scrubbing away dirt and grime, with long ergonomic handles for leverage and comfort. The soaping brush, bottle brush and straight brush feature bristles made from tampico, a natural fiber derived from the agave plant. Tampico is extremely durable, resists chemicals, and holds moisture well, making it an ideal material for cleaning brushes. BCB-5 FEATURES Included brushes: - Soaping Brush: Great for making an initial pass over the bike, dispersing soapy water and breaking up large accumulations of debris. - Tapered Bottle Brush: A general purpose tampico brush for scrubbing areas both big and small. - Straight Brush: A long-reach brush with short, tight tampico bristles for getting into small nooks and crannies such as suspension pivots, saddle rails, and other hard to reach areas. - Drivetrain Brush: Long, stiff nylon bristles make this brush ideal for derailleurs, cassettes, and other areas with grease or dirt build up. - Soaping Sponge: Useful for applying soap and water as well as cleaning delicate surfaces, with a convenient wedge shape. Notes about tampico fibers: - Tampico is a natural fiber: as such, variations in the color of the bristles are to be expected. - Tampico bristles may become temporarily deformed in shipment or storage. Get brushes wet, reshape by hand, and hang to dry. - Always allow tampico brushes to dry fully in an open area before storage to inhibit growth of mildew or mold.

The Mini P20 is a 20-function, pro-quality, precision mini-tool with a sleek forged alloy body. Integrated chain tool with built-in master link tool for removing master link type chains folds away for a streamlined profile. Perfect for any road or trailside repair. - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Size: 7.4 x 2.9 x 1.8cm / 2.9" x 1.1" x 0.7" - Weight: 131g / 4.62oz - Additional Features: Knife blade lock, extendable for leverage, and secondary chain link fence - Includes neoprene bag Tools: - S2 / 3 / 4 / 5 / 6mm Allen wrenches - 8mm hex socket - T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, CrMo master link tool - #2 Phillips screwdriver - Serrated knife / saw

A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.

Pedro's premium adjustable wrench is a great addition to any tool set. Features include: an innovative jaw design which prevents damage to fasteners and opens to 33mm; an ergonomic, soft-plastic, TPR handle offering comfort, leverage, and easy handling; laser-engraved sizing scale and proper usage-direction arrows for simple operation; an optimized forged chrome vanadium body providing strength and lighter weight; and 10" (250mm) length for the perfect blend of leverage and portability. - Innovative jaw design prevents damage to fasteners and opens to 33mm - Ergonomic, soft-plastic, TPR handle offers comfort, leverage, and easy handling - Laser engraved sizing scale and proper usage direction arrows for simple operation - Optimized forged chrome vanadium body provides strength and lighter weight - 10" (250mm) length provides perfect blend of leverage and portability

Jagwire's Disc Brake Multi Tool includes 4 important and frequently used disc brake tools so you have what you need to keep your brakes working great. You get a pad spacer, bleed block, rotor truer (straightener) and piston press.

- Dual-density, ergonomic thermoplastic handles for comfortable grip and leverage. - Heat-treated tool steel construction for strength and durability. - Includes: #1 and #2 Phillips plus 4.5, 5.5, and 6.5mm flat-blade screwdrivers and storage pouch. These professional grade screwdrivers are designed for ease of use, comfort, and lasting durability. This five piece set provides the sizes required to work on all bicycles. Backed by Pedro's lifetime warranty.

Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results. Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

- Brake holder features M5, M6 & passthrough holes for attaching all disc brake mounting styles as well as most rim brake caliper styles - 1-1/8" steerer tube features star nut for retaining top cap and spacers - 2" flared cone for compatibility with tapered steerer tubes - Compatible with 1-1/8" threadless stems only—not compatible with threaded headset/quill stem setups

High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. These taps can be used with either steel or alloy crank arms. The set includes both right- and left-hand threads. The 1/2" size is common on "one-piece" cranks. • Includes a set of 2 taps, 1/2" x 20 tpi • Made of high carbon steel, precision ground, and hardened to stay sharp • Fits all conventional tap handles