Cables

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Extend housing runs using these double-ended junction end caps.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 1x Elite Link Shift Kit

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Jagwire's Hydraulic Fittings Combo Box is a handy parts box for your home shop that includes a variety of common fittings and seals for a range of disc brakes from Avid, Formula, Hayes, Magura, Shimano and Tektro.

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

- 5mm derailleur housing

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

Lined end caps have an internal sleeve that extends out from the end. This liner protects the inner cable from the opening in the end cap, preventing cable coatings from wearing off and ensuring the lowest possible friction. Lined end caps can also be paired with a sealing liner or a dirt guard to keep dirt and grime out of the housing. Use lined end caps whenever you use Teflon-coated cables to protect the coating.

Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Mountain Elite Link Brake Kit

Road Pro Brake kits offer enhanced performance and style. Like Road Pro Brake kits, Mountain Pro Brake kits are sold separately from our Pro Shift kits so you can create the best color combination for your bike. Pro level polished brake cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Mountain Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Mountain Pro Quick-Fit kits allow the easy installation of Jagwire hose with Shimano disc brakes. Kits contain enough hardware for both front and rear brakes. - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation - Compatible with: Shimano Deore M596, M615

With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit. Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models. - A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure - Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately) - Mountain Pro hydraulic hose kits are available in 12 colors and finishes - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hayes brakes and includes enough hardware for one bicycle.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means better braking performance with enhanced modulation. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional coiled steel housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Compressionless link housing gives crisp brake lever feel with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 50% lighter than traditional coiled steel brake housings; 30% lighter than Kevlar brake housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (RCK705) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue

The Road Elite Sealed Brake Kit uses a continuous liner that seals the system completely and protects it against dirt, mud and debris. Available in unique three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the lowest possible friction, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the brake caliper offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Low-compression housing results in crisp brake lever feel - 2.4mm inner liner may not be compatible with all frames and components What's Included: - 1x 2200mm CSX Brake Housing - 1x 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable - 1x 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable - 1x 1275mm Slick-Lube Liner - 1x 1925mm Slick-Lube Liner - 2x Open Brass End Caps - 4x Open Alloy End Caps - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.