Skip to main content
Attention Wheel Away Customers: Please note that Wheel Away does not service E-Bikes that are not Specialized brand.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$163.30
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"
$199.99
Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g
$65.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
$13.99
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
$150.00 - $164.99
The Orbitron is the new gold standard for platform pedals. The high grip layout features 16 pins per side on an ultralight alloy body. Beautifully machined axles paired with premium bearings and bushings keep you running for miles to come. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight compact bushings + sealed bearings - Replaceable pins
$35.99
Our caged pedals are heavy-duty and designed to fit all our bikes. These pedals allow you to apply force in a downward and upward motion, enhancing overall output and efficiency. If you want to get even more out of your ride, these are definitely the way to go. - 9/16" spindle - Alloy pedal, plastic cages, alloy hardware - Velodrome approved
$164.99
Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'd aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208g (each)
$29.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g
$19.99
Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g
$99.95
These pedals re-work the classic parallelogram pedal design to offer increased grip, support, and weight savings for anything from all mountain, to dirt jump, to downhill. - Large aluminum alloy platform profile for more surface area and improved grip - Thin 16mm depth and concave body design - Chromoly axle with sealed bearings - Replaceable/tunable pins for preferred grip - 9/16"
$48.26 - $54.95
A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"
$59.95 - $69.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"
$12.99
- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair
$99.99
With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain. FEATURES - Wide, dual-sided platform improves pedal-to-shoe stability and power transfer - Integrated cage increases control when not clipped in and protects binding mechanism from impacts - Robust retention claws provide smooth engagement and release - Rider adjustable entry and release tension for individual customization - Chrome-moly spindle and low-maintenance sealed bearing cartridge axle
$149.99
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
$149.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
$137.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g
$59.99
Shimano's PD-R540 Pedals are fine pedals at a great value. Entry and exit is natural so you'll have no trouble starting and stopping. And, when you're clipped in you'll pedal with more power and comfort. The R540s are light, too, so they make a nice upgrade. - Weight: 330 grams (pair)
$79.99
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)
$252.00
The ceramic bearing and famous BLADE technology transfers 100% of your power input to the drivetrain, making the KEO BLADE CARBON CERAMIC pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. - Lightweight, but durable at 110g per pedal / 290g pair with cleats - 65% more contact area than the competition, 67mm platform width, 700mm² platform area for maximum - power transfer and greater pedal stability, stainless steel optimizes pedal stiffness - Easy clip in/out with carbon blade tension, 12 (installed), 16 (sold separately), 20 (sold separately) - Comes with KEO Grip Cleat and compatible with the Standard KEO Cleat, 0°, 4.5° (included), 9° float options available separately - Carbon Body, Stainless Steel Platform, Chromoly + Spindle, Patented Carbon Leaf Spring Retention, Ceramic Bearings
$264.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Titanium - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 145g - Weight (pair + cleats): 340g - Float angle: 6° - Release angle: 13°
$55.99
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)
$180.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°
$129.99
The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g
$88.00
Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 203g - Weight (pair + cleats): 461g
$179.95
Based around SPD technology, DMR has engineered an extremely adaptable caged-clip system with the V-Twin. These pedals offer a number of different grip and feel options by utilizing a range of pins paired with a unique nylon "bumper" and metal shim feature. - Large, extruded and CNC'd aluminum platform cage - SPD-compatible design with 5 degrees of float - Nylon 'bumper' and steel sizing shims customize platform feel - Serviceable bearing system - 7 tuneable pins per side (full set supplied) - 4140 chromoly axles - Anodized finish - 9/16"
$96.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders -Durable 6061 alloy construction with 20 replaceable traction pins (10 per side) - 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system - Weight: 380g
$49.99
Dimension Mountain Pro Pedals. - Forged aluminum body - Sealed bearings - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 270 g