Filter By:
- Wheels (137)
- Parts & Accessories (137)
- Hubs (47)
- Rims (50)
- Spokes (12)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$1,036.90
The CRC 1400 Spline db 24 - a wheel for all these challenges off the beaten roads. No matter if you are competing in cyclocross races, gravel adventures or simply the prestigious CX-lunchride with your colleagues. This wheel will bring a big smile onto your face. The full carbon tubeless ready rim, laced to a straight pull 240s based hub, combines maximum reliability for the harsh off-road. Perfectly suited for the use of extra-wide tubeless tires, you'll be impressed by the combination of lightweight, comfort and grip while searching for new adventures off the beaten roads.

$1,036.90
High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you?
- Spline 240S based hub

$1,006.90
The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails.
- Built to provide ultimate riding agility for light eMTBs
- Perfect balance between low weight and resistance, ready to go faster in the ups and the downs
- Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight
- The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency

$989.99
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes.
- Designed for Enduro applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$975.90
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$975.90
Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs and Competition Race spokes, allowing every bit of energy to be transferred into forward motion.
- Designed for Cross Country applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$880.99
$1,174.99
25% Off
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$849.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction.
2 Year No Fault Guarantee
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster needed
- Wider bearing stance 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Independently sprung pawls
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- Full carbon fiber construction
- 31mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- High gloss black water transfer logos

$843.90
The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character.
- OXiC rim surface technology for improved braking performance and wear
- Tubeless Ready rim compatible with standard clincher tires
- 240 hub with 36t SL ratchet system and ProLock Squorx ProHead spokes built with two-cross lacing
- Factory installed tubeless-ready tape
- Includes titanium RWS skewer, tubeless valve, 10-speed spacer and Swissstop BXP blue brake pads

$833.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight
$824.99
$1,100.00
25% Off
Performance Upgrade Made Easy
The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much.
Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.

$824.99
$1,099.99
25% Off
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement.
- Rim Type: Carbon Clincher, tubeless-first
- Rim Material: Advanced Carbon Composite
- Rim Width (internal): 25mm
- Rim Depth: 32mm
- Front Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Count: 21
- Spoke Type: DT Swiss Aerolite T-head
- Nipple Type: DT Swiss Pro Lock Alloy hexagonal
- Spoke Length: Right/Left: 276mm/274mm
- Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap
- Assembly Method: Handbuilt
- Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)
- Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g

$805.99
$1,075.00
25% Off
Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$803.90
When you head into trouble on the trail, be it up or down, the HX 1501 Spline One will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry leading rim alloy and profile design, the HX 1501 SPLINE ONE 30 isn't a one day wonder, but a trusty longterm partner.
- 240s based Spline hub with 24 tooth ratchet system and steel Shimano freehub body
- E-bike specific straight pull spokes are built with a 3-cross pattern
- Includes tubeless tape and tubeless valve

$799.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction.
2 year no fault guarantee
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster needed
- Wider bearing stance 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Independently sprung pawls
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- Full carbon fiber construction
- 31mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- High gloss black water transfer logos

$767.99
$1,025.00
25% Off
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road.
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi).
- Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve).
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- System Weight Limit: 275lbs / 125kg

$750.00
HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams!
Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames.
Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too.
Additional Info
- Rim Type: 85mm
- Rim Material: Carbon
- Rim Weight: 445g
- Color: Twill Weave
- Rim Hole Count: 32
- Drill Pattern: Symmetrical Only
- Decal Type: White
- MIN/MAX TIRE SIZE: 3.8 - 5.0"
- Rim ERD: 564 (includes washer)

$750.00
HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams!
Thus far, our Big Deal fat rims and wheels have won the hearts of cyclists around the world. What if that's not enough for you? What if we told you that we now have an even BIGGER deal than before?
Enter: The Big Half Deal (B.H.D.). This is a special, larger diameter version of our beloved 85mm-wide carbon Big Deal rim. With a 27.5-inch size, it's smack-dab-HALF-way between a 26" wheel and a 29" wheel. If you have a new-fangled 27.5" fat bike, this is THE performance rim choice.
Like other Big Deals, the B.H.D. is tubeless ready with our patented Inflatobam technology.
Tech Notes
1. Do NOT use tire levers on B.H.D. rims!
2. Specific to our Big Deal line of carbon rims: If you choose to ride these rims on regular dirt trails (e.g. NOT in soft snow or sand), wider tires and higher air pressure will decrease the chance of rim damage from striking an obstacle. We strongly recommend an honest assessment of your ride style. For the BHD, use 8psi minimum on groomed snow, or 10psi minimum on dirt and rocks - both with a minimum tire size of 3.8".
Additional Info
- Rim Width: 85mm
- Rim Material: Carbon
- Rim Weight: 465 grams
- Color: Twill Weave
- Rim Hole Count: 32
- Drill Pattern: Symmetrical Only
- Decal Type: White
- MIN/MAX TIRE SIZE: 3.8 - 5.0"
- Rim ERD: 589 (includes washer)

$749.99
$999.99
25% Off
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.
- Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve)
- Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg

$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm

$709.99
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset.
The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that.
From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed.
Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed.
The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control.
- Arch MK4 wheels include pre-installed tape for tubeless use and presta valves.
- Versatile 28mm internal rim width optimized for 2.2-2.5” tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
- BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build
- M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement
- Enduro bearings with double-row freehub bearing
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice

$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.