Tools

The Problem Solvers Holy Driver is a durable chromoly tool used for holding and turning spoke nipples when building wheels and fixing them. You can use it manually, spinning it in your fingers to quickly fasten nipples. And, you can use it in a power drill for even faster wheel work. The tool tip fits into the slot in the top of the nipple and holds securely. Plus, the length is adjustable so it's great for use on standard and deep-profile rims.

- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling. - Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches. The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic. Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort. The set includes T7, T10, T15, T20, T25, T30, and T40 sizes all backed by Pedro's lifetime warranty.

The Pro Internal Cable Routing Tool uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed "lead wire." - This pack includes replacement fittings to attach magnet to cables, housing, hydraulic hose, and electronic wire

The most lightweight, compact 16 function multi-tool (with integrated chaintool) available. Very handy as it fits in a jersey pocket, saddle bag, or even a Ninja ToolBox. Tools: - 2 / 2.5 / 3 / 2.5 & 4 (L-type) / 5 / 8mm Allen wrenches - 4 / 6mm hex sockets - T10 / T15 / T25 Torx wrenches - #2 Phillips / flat head screw drivers - 14G / 15G spoke wrenches - CrMo steel chain tool and chain hook (the chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains) - Tool Material: Chrome vanadium steel - Body Material: Carbon fiber reinforced injection polymer - Added Feature: Leverage added on 4 / 6mm Allen wrench, L-type wrench - Size: 6.1 x 3.3 x 1.9cm / 2.4” x 1.3” x 0.5” - Weight: 92g / 3.24oz

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

- Precision laser-cut, heat-treated tool steel construction. - Ergonomic design for maximum leverage and comfort. - Compatible with domestic and imported beers. We dug deep to design this essential shop tool. Pulling inspiration for across our innovative tool lineup, you will find this to be the best shop quality bottle opener available. After all, sometimes you need a little inspiration to fix that derailleur that just won't shift right no matter what you try! A must for every tool box or gear bag. Compatible with both domestic and imported beers and the more you use it, the better it works...or at least it seems that way! Backed by Pedro's lifetime warranty.

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

• HD hardened steel construction

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

The Mini P20 is a 20-function, pro-quality, precision mini-tool with a sleek forged alloy body. Integrated chain tool with built-in master link tool for removing master link type chains folds away for a streamlined profile. Perfect for any road or trailside repair. - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Size: 7.4 x 2.9 x 1.8cm / 2.9" x 1.1" x 0.7" - Weight: 131g / 4.62oz - Additional Features: Knife blade lock, extendable for leverage, and secondary chain link fence - Includes neoprene bag Tools: - S2 / 3 / 4 / 5 / 6mm Allen wrenches - 8mm hex socket - T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, CrMo master link tool - #2 Phillips screwdriver - Serrated knife / saw

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

- Special cable cutter for SIS type cables and housings - Neat, clean cut - Features a cable ferrule plier - Superior quality, 1095 carbon steel

30 function, pro-quality, precision mini-tool with integrated tubeless tire repair tools. Removable chain tool with built-in master link tool for removing and reinstalling master link type chains stores securely within the Mini PT30 body. Forged alloy body. Perfect for any road or trailside repair. - Functions: 30 - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Weight: 169g / 5.96oz - Size: 7.4 x 4 x 1.9cm / 2.9" x 1.6" x 0.7" - Additional Features: Knife blade & plug insertion tool lock, extendable for leverage, secondary chain link fence, chain pin breaker, and master link storage compartment - Includes neoprene bag Tools: - 2L / 2.5 / 3 / 4 / 5 / 6 / 8mm Allen wrenches - 10mm hex socket - T10 / T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, chain hook, CrMo master link tool (compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains) - #2 Phillips / flat head screwdrivers - Tire reamer, plug insertion tool - Serrated knife/saw, disc spacer

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

To adjust preload on Hollowtech II cranksets

Add on-tool storage and eight frequently used bits to the Multi-Torque, T-Handle Bit Drive, or Pro Bit Driver. The set includes our new JIS compatible #2PH screwdriver bit and like all Pedro's hex bits, each is made from premium S2 tool steel. - TPR holder designed to fit Multi-Torque, T-Handle Bit Drive, and Pro Bit Driver. - Bits made from premium S2 tool steel to ensure strength and lasting performance. - Includes 2, 2.5, 3, 4, 5, 6mm hex, T25 torx, and JIS compatible #2PH screwdriver bits.

- Premium syringes offer enhanced clarity, improved durability, and ergonomic handles. - Innovative quarter-turn valves make it easy to quickly open and close the bleed system. - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician. - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers. - Available separately for DOT fluid and mineral oil systems, each kit contains adapters for nearly all disc brake systems on the market. - Deluxe case keeps small parts organized and protected. -01: (Black Seal) : fit most DOT fluid brakes from Avid, SRAM, Formula, Hayes, and Hope -02: (Red Seal) : fit most mineral oil brakes from Shimano, Magura, Tektro, TRP, and Hayes

The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

• 5/6mm hex wrenches

Engineered for fit, function, and leverage, these L-shaped shop-quality Torx compatible wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Torx compatible drivers at each end - Includes T6, T8, T10, T15, T20, T25, T30, and T40 - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

- Hardened & nickel plated - Fits Shimano, SRAM GXP, Truvativ, RaceFace, FSA, and Campagnolo - Dual-compound handle

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces.

Park Tool's Shop Scissors are shop quality with sturdy, stainless steel blades and a dual-density grip. They're perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape, and handle grips.

The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.

The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

Park's Side Cutter Pliers are professional quality, 7-inches long, and made from heat-treated, forged chromoly steel for crisp, easy cuts and durability. They boast soft-touch, dual-density handles for an excellent grip, too.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

The 15-inch SWB-15 is a forged steel breaker bar with a 3/8-inch square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.

A puncture in your tubeless tire doesn't have to be a death sentence for your ride. This handy carry-along tool repairs small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket. - Includes 5 vulcanized rubber plugs (refills available — part #2370K) - Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") - Weight: 79 grams (2.8 oz.) with plugs NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, -4, and -33) - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

Tools for working with DT Swiss spokes. - Punch with concave head - Improves seating of the spoke head in the hub flange

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface

Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-7 is a dual sided wrench that features a 30mm opening on one end and a 32mm opening on the other.

Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

The BRK-1 is our ultimate mobile mechanic tool kit. This tailored selection of 100 professional-grade bike tools was carefully chosen by our team of experienced mechanics, with a comprehensive offering of the tools you'll need to adjust, replace, diagnose, and repair most components on a bicycle. Whether you're working in a professional race pit, neutral support tent at a local event, or the trailhead parking lot, you'll have the tools you need — and none of the tools you don't. The BRK-1 was designed around our BX-3 Rolling Big Blue Box, a professional-grade toolbox for the professional bike mechanic. When open, the BX-3 is a neatly-organized display of your tool collection, featuring dual-sided pallets with hundreds of custom-designed loops and pockets. The BX-3 has room to grow your tool collection even when fully loaded with the contents of the BRK-1. When closed, the BX-3 is built for travel, with a tough weather-resistant outer shell, integrated wheels and an extendable handle. - BX-3 Dimensions: 23.4"" x 17.3"" x 9.3"" (59.5 cm x 44 cm x 23.5 cm) - Weight: 48.5 lbs (22 kg) NOTE: Tool kit contents are subject to change.

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold

The T-Handle Bit Drive is a versatile, lightweight, 1/4" hex bit drive tool with in-handle bit storage. Designed for use with our Multi-Torque torque indicating bit drive, the T Handle Bit Drive is also a fantastic stand-alone multitool platform. Store up to four standard 1/4" hex bits inside the handle plus one in the magnetic bit drive, or add the compatible Multi-Torque Bit Set to store eight additional bits on board. - 80 gram, 5-function, sliding t-handle, bit-based multitool with 1/4" magnetic drive, and in-handle bit storage. - Compatible with Multi-Torque Bit Set. - Includes 3, 4, 5, 6mm hex and T25 torx bits.

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.