Filter By:
Forks

$59.99 - $69.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm

$425.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes.
- Full unidirectional carbon construction
- Mid-Reach Caliper rim brake compatible
- 35c max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12"
- No rider weight limit
- 5 year Whisky warranty
- Accommodates road plus tires
- Fender mounts
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 42mm max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru-axle and Whisky Parts Co. compression plug

$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c

$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
- 100 x 12mm thru-axle
- 1-1/8 – 1.5" tapered steerer
- 45mm offset

$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.

$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires.
- 9mm x 100mm spacing
- For use with short reach caliper rim brakes
- 700 x 28c max recommended tire size
- ASTM Condition 1 - For use on paved surfaces
- Includes Whisky Parts Co. compression plug
- Axle to Crown Length: 367 mm
- Brake Mount (Fork): Short Reach Caliper (39mm - 49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 9mm x 100mm
- Material: Carbon
- Offset: 43 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Straight
- Steerer Tube Length (mm): 300 mm
- Weight: 370 g
- Wheel Size: 700c , 650b
- Maximum Tire Clearance (Fork): 30c

$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat-mount disc brakes
- Fender eyelets on outside of fork leg for easy mounting
- 700c x 42mm or 650B x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches
- Includes thru-axle and Whisky Parts Co. compression plug

$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup.
- 12mm thru-axle, 100mm spacing
- 700c x 42mm or 650b x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24
- Includes thru-axle and Whisky Parts Co. compression plug
- Brake Mount: Flat Mount 140
- Material: Carbon
- Weight: 526g
- Steerer Type: Tapered
- Offset/Rake: 45
- Steerer Tube Length: 350mm
- Axle to Crown Length: 395mm
- S.H.I.S. Crown Race Diameter: 40
- S.H.I.S. Stem Clamp Diameter: 28.6
- Fork Minimum Rotor Size: 140
- Fork Maximum Rotor Size: 160

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch

$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders.
- 12 x 100mm thru-axle
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700c x 51mm or 650b x 61 mm max tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru axle and Whisky Parts Co. compression plug

$525.00
A thoughtful complement to the Whisky No. 9 MTN Boost LT Fork, this short-travel offering is just the piece for transforming hardtail racers into fully rigid cross-country champs. Lightweight carbon construction, a tapered steerer, and thru-axle dropouts promise dependable strength and steering.
- Lighter and stiffer than a suspension fork, the MTN Boost ST Fork is long enough to replace forks with 110–120mm of travel
- 485mm axle to crown
- Boost 110mm spacing with clearance for 29 x 3.0” or 27.5 x 3.0” tires
- Room for up to 180mm rotor
- Whisky No.9 Thru Bolt and compression plug included
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance.
- 1-1/4-inch Tapered steerer tube
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700 x 30c max recommended tire size
- Includes thru axle and Whisky Parts Co. compression plug

$7.50
$10.00
25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

$930.00
The RockShox SID SL Ultimate BRAIN incorporates a race-tuned Brain Inertia Valve with Position-Sensitive technology into the all-new RockShox SID SL chassis.
New Position-Sensitive Brain technology provides more platform support while maintaining small bump compliance and chassis balance, making this the most efficient BRAIN yet.
Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip.
All new SID SL Ultimate Chassis features a machined alloy crown to shed even more weight while increasing stiffness.
- New Position-Sensitive tune provides an increase in platform support.
- New SID SL Ultimate chassis features increased stiffness, lighter weight, and reduced friction.
- Torque cap compatible for stiff dropout/hub interface.
- 100mm travel, 44mm offset, 110mmx15mm hub spacing.

$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm

$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard.
- Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end
- Legendary Bomber durability with 36mm stanchions
- Buttery and easy-to-use GRIP damper
- Tapered steerer tube for maximum stiffness
- Adapters available for 15 x 100mm axle
- 1.5 Tapered steerer
- Offset: 37mm

$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
Page 1 of 1