$15.99 - $16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$5.49 - $11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance. The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits. - The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance - All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike - The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run - 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos What's Included: - 1x 2200mm LEX-SL Shift Housing - 1x 2800mm Pro Polished Slick Shift Inner Cable - 2x Sealed Alloy End Caps - 4x Lined Alloy End Caps - 1x Hooded Alloy End Cap - 1x Cable Tip - 1x 5G Tube Top - 3x Cable Donuts - 1x Rotating Hook
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack
Open end caps have no o-ring or nylon ring. - Step-down design mates 5mm housing with 4mm stops - Material: chrome-plated steel - 100-pack
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm
$24.99 - $28.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$6.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$11.99 - $13.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks
$29.99 - $44.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
$25.99 - $32.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.
Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces
Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10 meter shops rolls can be cut to length to suit each bike's needs - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm
- 5mm derailleur housing
- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m
Page 1 of 3 Next page